Issue Date: October 21. 2022


Dover Fueling Solutions
MagLink LX
(Dover Fueling Solutions 924B probe with 2 inch dia Floats)



Leak rate of 0.2 gph with PD = 99.70% and PFA = 0.30% 
Leak rate of 0.1 gph with PD = 95.56% and PFA = 4.41%.

Leak Threshold

0.1 gph for leak rate of 0.2 gph. 
0.05 gph for leak rate of 0.1 gph.
A tank system should not be declared tight if the test result indicates a loss or gain that equals or exceeds this threshold.


Gasoline, diesel, aviation fuel, fuel oil #4, solvents, waste oil, other bio-diesel and ethanol blends compatible with probe floats.

Tank Capacity

Maximum of 20,650 gallons. 
Tank must be minimum 14% full for leak rate of 0.2 gph.
Tank must be minimum 15% full for leak rate of 0.1 gph.  

Waiting Time

Minimum of 8 hours between delivery and testing for leak rate of 0.2 gph. 
Minimum of 12 hours between delivery and testing for leak rate of 0.1 gph. 
There must be no delivery during waiting time.

Test Period

Minimum collection time of 2 hours for leak rate of 0.2 gph.
Minimum collection time of 4 hours for leak rate of 0.1 gph.
Test data are acquired and recorded by system's computer.  
There must be no dispensing or delivery during test.


Average for product is determined by a probe containing 5 thermistors.

Water Sensor

Minimum detectable water level that can be detected is 1.016 inch.  
Minimum detectable change in water level that can be detected is 0.0098 inch.


Thermistors and probe must be checked and, if necessary, calibrated in accordance with manufacturer's instructions.


Not evaluated using manifolded tank systems. Therefore, this certification is only applicable when there is a probe used in each tank and the siphon is broken during testing. 
Evaluated with 2 diameter OPW fuel floats and 2 diameter DMP water floats.
Tests only portion of tank containing product. 
As product level is lowered, leak rate in a leaking tank decreases (due to lower head pressure). Consistent testing at low levels could allow a leak to remain undetected. 
EPA leak detection regulations require testing of the portion of the tank system which routinely contains product.


Dover Fueling Solutions

Evaluator:  Ken Wilcox Associates

6900 Santa Fe Dr.

Tel:  (816) 443-2494

Hodgkins, IL 60525-9909

Date of Evaluation:  09/15/2021; 9/21/2021

Tel:  (708) 485-4200






 | Home | Vendors: A - F | Vendors: G - M | Vendors: N - S | Vendors: T - Z | Method Index | Glossary |

Appearance on this list is not to be construed as an endorsement by any regulatory agency nor is it any guarantee of the performance of the method or equipment.
Equipment should be installed and operated in accordance with all applicable laws and regulations.  For full details, please refer to our expanded "DISCLAIMER" page.