The vapor sensor probe was recalibrated when it did not recover, after 1 hour,
from exposure to test vapors.
Results (in addition to above for EMS-3000 301-0328-001, 301-0330-001): Activated:toluene, xylene(s) Not
Results (in addition to above for EMS-3500 Vapor Sensor Probe Part No.
301-0634): Activated:n-hexane, toluene, xylene(s).
Vapor Sensor Probe Part No. 301-0634 is for use in normally dry monitoring wells
to detect hydrocarbon vapors.It can
be used in monitoring wells up to 20 feet deep.The probe will alarm if it comes in contact with water and must be
removed immediately to prevent damage to probe.
lower detection limit has been statistically determined to be within the range
this list is not to be construed as an endorsement by any regulatory agency nor
is it any guarantee of the performance of the method or equipment.
Equipment should be installed and operated in accordance with all applicable
laws and regulations. For full details, please refer to our expanded "DISCLAIMER"